Y Type Globe Valve

Specification parameters Name Y Type Globe Valve Size NPS 2′′~NPS 14′′DN50-DN350 Pressure CLB150~CL600 PN10~PN40 Temperature -30~180°C Body Material Stainless steel 304.316, cast steel Product Introduction The valve stem and the passage are at an angle, and the seat sealing surface has a certain angle with the inlet and outlet passages. The globe valve allows the fluid to ha
Size Range
NPS 2′′~NPS 14′′DN50-DN350
Temperature Range
-30~180°C
Pressure Rating
CLB150~CL600 PN10~PN40

Specification parameters

Name Y Type Globe Valve
Size NPS 2′′~NPS 14′′DN50-DN350
Pressure CLB150~CL600     PN10~PN40
Temperature -30~180°C
Body Material Stainless steel 304.316, cast steel

Product Introduction

The valve stem and the passage are at an angle, and the seat sealing surface has a certain angle with the inlet and outlet passages. The globe valve allows the fluid to hardly change the flow direction and is the smallest flow resistance in the shut-off valve. Widely used in petrochemical, metallurgical, chemical, power station, pharmaceutical and other industries. The flow path of the Y-type stop valve body body is inclined with the main flow path, so that the degree of damage of the flow state is smaller than that of the conventional stop valve, and thus the pressure loss through the valve is correspondingly small.

Product advantages:

1. Reasonable product structure, reliable sealing, excellent performance, beautiful appearance, convenient manufacturing and maintenance;

3. The working schedule is small and the opening and closing time is short.

4. Sealing surface push-welding division Taili hard alloy, wear-resistant, corrosion-resistant, anti-friction performance, long service life;

5. Stem quenching and surface nitriding treatment, good corrosion resistance and anti-friction performance;

6. Double seal (including bellows design), reciprocating test 10,000 times without failure, more reliable performance to prevent leakage;

7. The stem lift position indication is more intuitive;

8. Parts material, flange and butt weld end dimensions can be selected according to actual working conditions or user requirements to meet various engineering needs.

Get in Touch

Contact Us

This site uses cookies

This website uses anonymous performance cookies to ensure you get the best experience on our website. We never use targeting or advertising cookies.